EasyManua.ls Logo

BE I2000L - Maintenance

BE I2000L
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
25
NOTICE
• Do not overload. The total load of all electrical appliances must not
exceed the supply range of the generator. Overloading will damage
the generator.
• When supplying precision equipment, electronic controllers, PCs,
Electronic computers, microcomputer based equipment or battery
chargers, keep the generator a sufficient distance away to prevent
electrical interference from the engine. Also ensure that electrical
noise from the engine does not interfere with any other electrical
devices located near the generator.
• If the generator is to supply medical equipment, advice should first be
obtained from the manufacturer, a medical professional or hospital.
• Some electrical appliances or general-purpose electric motors have
High starting currents, and cannot therefore be used, even if they lie
within the supply ranges given in the above table. Consult the equip-
ment manufacturer for further advice.
7. MAINTENANCE
The engine must be properly maintained to ensure its operation is safe,
economical and trouble-free, as well as eco-friendly.
In order to keep your gasoline engine in good working condition, it must
be periodically serviced. The following maintenance schedule and routine
inspection procedures must be carefully followed:
Items Frequency Each time First 1
month or
first 20hrs of
operation
Thereafter,
every 3
months or
every 50hrs
of operation
Every year
or every
100hrs of
operation
Engine oil Check-
Refill
X
Replace X X
Reduction
gear oil (if
equipped)
Oil level
check
X
Replace X X
Air filter
element
Check X
Clean X
Replace X
Deposit Cup
(if equipped)
Clean X
Spark Plug Check-
adjust
X
Replace Every year or 250hrs of operation
Spark arrester Clean X
Idling (if
equipped)*
Check-
adjust
X
Valve
clearance*
Check-
adjust
X
Fuel tank &
fuel filter*
Clean X
Fuel line Check Every 2 years (change if necessary)
Cylinder head,
piston
Clean up
carbon*
<225cc, Every 125hrs
225cc, Every 250hrs
* These items should be maintained and repaired by our authorized dealer, unless
the owner has appropriate tools and is proficient with mechanical maintenance.
>
=
OPERATION MAINTENANCE

Related product manuals