Do you have a question about the BEA LZR-I110 and is the answer not in the manual?
Type | Laser Scanner |
---|---|
Number of Curtains | 1 |
IP Rating | IP65 |
Technology | Time-of-flight (TOF) |
Detection Range | 0.1 m to 10 m |
Power Supply | 24 V DC |
Consumption | < 2.5 W |
Scanning Range | 0.1 m to 10 m |
Precautions regarding laser beams, unauthorized repairs, and qualified personnel.
Guidelines for proper installation, environmental handling, and sensor care.
Labeled diagram identifying key parts of the laser scanner unit.
Explains the meaning of different LED states for detection, error, and power.
Interpretation of symbols used in the manual, including laser radiation and certifications.
Step-by-step visual guide for attaching the sensor using the mounting template and bracket.
Illustrates wiring connections for power supply, relays, and test inputs.
Guide to adjusting lateral position, tilt angle, and locking the bracket.
Instructions on choosing the correct mounting side for automatic detection learning.
Table detailing width and height detection ranges for both models.
Steps to initiate teach-in after installation or changes to the detection zone.
Adjusting the number of active curtains and the uncovered zone for detection.
Modifying immunity filter settings and minimum object size detection.
Setting up output relays and redirection for door opening or safety signals.
Setting up a second detection field to secure the door during its opening cycle.
Installing and configuring virtual push buttons as activation zones for manual door opening.
Procedures for unlocking, adjusting parameters, and checking values using the remote control.
Steps for saving, deleting, and managing access codes for remote control sessions.
Solutions for problems related to power supply, wiring, and LED indicators.
Troubleshooting tips for detection field size, object detection, and masking issues.
Resolving problems with remote control response, unlocking, and access codes.
Comprehensive list of technical data including detection, electrical, dimensional, and environmental parameters.