MS31
Touchless-activation switch for automatic doors
ENGLISH
75.5985.01 MS31 20200630 Page 1 of 4
TECHNICAL SPECIFICATIONS
Technology: microwave motion sensor
Radiated frequency: 24.125 GHz
Radiated power density: < 5 mW/cm
2
Supply voltage:
to be operated from SELV-compatible
power supplies only
12 – 24 VAC ±10%
12 – 24 VDC +30% / -10%
Supply frequency: 50 – 60 Hz
Power consumption: < 1.5W
Output
relay contact rating (max. voltage):
relay contact rating (max. current):
Max. switching power:
relay with switch-over contact (voltage-free)
60 VDC / 125 VAC
1A (resistive)
30W DC / 60 VAC
Detection range: 4 – 24” (adjustable)
Detection mode: motion (bidirectional)
Output hold time: 0.5 – 30 sec
Temperature range: -4 – 131 °F (-20 – 55 °C)
Weight: 0.34 lbs
Material: PC, PE
IP rating: IP54
Certification: Electromagnetic compatibility (EMC) according to 2004/108/EC
FCC: G9B-210161
IC: 4680A-210161
Specifications are subject to change without prior notice.
All values measured in specific conditions.
SINGLE-GANGJAMB DOUBLE-GANG 6” ROUND
Visit website for
available languages of
this document.
MOUNTING BOX COMPATIBILITY
JAMB SINGLE-GANG DOUBLE-GANG 6” ROUND
SURFACE-MOUNT 10BOXJAMBST
10BOX24SGSM
10ABOXSGSMS
10BOXDGSM
10BOX475SQSM (must
use adapter bracket)
10BOX6RNDSM (must
use adapter bracket)
FLUSH-MOUNT N/A
standard, single-gang
electrical box (not
provided by BEA)
standard, double-gang
electrical box (not
provided by BEA)
standard, single-gang
electrical box (not
provided by BEA)
To Next Page
Need help?
General