Need help?Do you have a question about the Beachcomber 580 and is the answer not in the manual?
Diagram illustrating the main parts of a Beachcomber Hot Tub for user familiarization.
Guidelines for safe electrical connections, grounding, and bonding to prevent shock hazards.
Recommendations and warnings regarding safe water temperatures and prolonged exposure.
Instructions on proper installation and use of suction fittings to prevent entrapment.
Description of anti-slip flooring and handgrips for safer entry and exit.
Instructions on using cover lock assemblies to prevent unauthorized entry.
Step-by-step guide for connecting fittings, opening valves, and filling the hot tub with water.
Guidance on correct water levels for filling and preventing pump damage.
Description of the Hybrid Edition with equipment located under a safety step.
Description of the Original Portable with equipment inside the cabinetry.
Step-by-step guide for removing, cleaning, and maintaining the hot tub's microfilter.
Diagrams showing component layout for Original Portable hot tub models.
Diagrams illustrating components for Hush Pump™ and Turbo versions.
Diagrams for Hybrid Edition hot tubs with Hush Pump™ and Turbo.
Diagrams for Hybrid Edition hot tubs with 2 Speed Pump.
Instructions for initial hot tub activation, priming sequence, and pump operation.
How to set and display the hot tub's water temperature in Fahrenheit or Celsius.
Explanation of Standard, Economy, and Sleep modes for heating the hot tub.
How to activate and control the massage jet pumps for low and high speeds.
Instructions for using Turbo, Light, and Standby modes on the control panel.
Guide to setting daily filter cycle start and end times for optimal operation.
How to lock the control panel and set temperature to prevent unauthorized changes.
List and explanation of error codes and messages displayed on the control panel.
How to disable system reminders for maintenance tasks.
Procedure to switch temperature units between Fahrenheit and Celsius.
How to switch the time display format between 12-hour and 24-hour modes.
Instructions for activating and deactivating the hot tub's standby mode.
Steps for initial hot tub activation, priming, and pump operation.
How to adjust the water temperature and understand the display.
Explanation of Standard, Economy, and Sleep modes for heating the hot tub.
How to activate and control massage jet pumps for low and high speeds.
Steps to set the local time on the control panel.
Guide to changing filter cycle times for optimal water circulation.
How to lock the control panel and set temperature to prevent unauthorized changes.
Explanation of error codes and messages displayed on the control panel.
Initial hot tub activation, priming mode, and pump operation instructions.
How to set and display the water temperature in Fahrenheit or Celsius.
Explanation of Standard, Economy, and Sleep modes for heating the hot tub.
How to activate and control the massage jet pumps.
Guide to selecting filter cycle frequency and timing.
Explanation of error codes and messages displayed on the control panel.
Initial hot tub activation, priming mode, and pump operation instructions.
How to set and display the water temperature in Fahrenheit or Celsius.
Explanation of Standard, Economy, and Sleep modes for heating the hot tub.
How to activate and control the massage jet pumps.
Guide to selecting filter cycle frequency and timing.
Explanation of error codes and messages displayed on the control panel.
Ideal ranges for pH, sanitizer, alkalinity, and calcium hardness for balanced water.
How to maintain proper sanitizer levels to prevent issues.
Importance and methods for adjusting pH for optimal water balance.
Balancing total alkalinity and calcium hardness for water stability.
Guide to using additional products like clarifiers and enzymes.
Operating instructions for different lighting modes (A, B, C, Freeze, Pulse, White).
How to clean the hot tub's acrylic surface safely and effectively.
Tips for maintaining the vinyl heatshield cover to prolong its lifespan.
Guidance on cleaning and maintaining the hot tub's exterior cabinet and steps.
How to remove, install, and adjust individual massage jets.
Explanation of air control valves for adjusting massage intensity.
How to use the diverter valve to control water flow to specific jets.
Information on operating the optional surround sound system.
Instructions for replacing the hot tub's incandescent or LED light.
How to adjust water flow for the optional waterfall feature.
Explanation of the Turbo option for increased jet pressure.
Information on the optional ozone generator for water purification.
Step-by-step guide on how to drain the hot tub safely.
How to prepare the hot tub for short vacations (3-5 days).
How to prepare the hot tub for longer vacations (5-14 days).
Explanation of how the hot tub protects against freezing temperatures.
Important precautions to take during freezing weather.
Steps to take during a prolonged power outage to protect equipment.
Procedure for properly shutting down the hot tub for periods longer than 14 days.
List of recommended practices for safe and proper hot tub use and maintenance.
List of actions to avoid for safety and to prevent damage.
Action required when the control panel is blank or shows no display.
What to do if the hot tub shuts down due to high heater temperature.
What to do if the hot tub shuts down due to high overall water temperature.
Action required when a potential freeze condition is detected.
Troubleshooting steps for sensor 'A' or 'B' jack issues.
Addressing issues where sensors are out of balance or showing differences.
Resolving problems related to water flow and heater performance.
Information on priming mode duration and temperature display status.
Understanding the display indicators for Standard, Economy, and Sleep modes.
Causes and solutions for GFCI breaker issues.
Troubleshooting for jet pumps surging on high speed.
Procedure to fix a neck jet that does not shut off.
Troubleshooting for the QSS remote control not operating functions.
Resolving issues with the remote control not working or CD player functions.
Coverage for the structural integrity of the hot tub shell.
Coverage for the hot tub's acrylic finish for five years.
Coverage for factory installed components for two years.
Guarantee for heatshield cover, jets, steps, filter baskets, and remote controls.
Information on transferring the guarantee to a new owner.
How to obtain service and the importance of hot tub registration.
What is not covered by the Beachcomber Guarantee.
Requirements for using, installing, and maintaining the hot tub.
Coverage for the structural integrity of the hot tub shell.
Coverage for the hot tub's acrylic finish for five years.
Coverage for factory installed components for five years.
Coverage for the Energy Saver Heater Element Assembly for five years.
Coverage against leaks from internal and external plumbing for five years.
Coverage for the Enviroskirt cabinetry for five years.
Instructions on how to register the premium guarantee online.
Important safety warnings regarding electrical shock and component replacement.
When to turn off power and seek qualified assistance for the audio unit.
Invitation to take a survey to improve services and products.
Table detailing water capacity, dry weight, and filled weight for various models.
Log to record microfilter cleaning and soaking activities.
Record for tracking hot tub drain and refill maintenance.
Log to record cleaning of the hot tub cover.
Record for tracking water samples taken to the store for analysis.
General| Electrical | 240V / 50A |
|---|---|
| Shell Material | Acrylic |
| Cabinet Material | Durawood |
| Seating Capacity | 6-7 |
| Pumps | 2 |
| Heater | 4 kW |
| Warranty | Shell Structure: 5 years, Shell Surface: 3 years, Components: 2 years |
To Next Page
