Need help?Do you have a question about the Beachcomber 738 and is the answer not in the manual?
Features anti-slip checker plate flooring for safer entry and exit.
Advises using handgrips for stability during entry, soaking, and exit.
Details use of cover lock assemblies to prevent unauthorized entry.
Features equipment located outside the hot tub under a safety step.
Features equipment tucked inside the hot tub cabinetry.
Diagram showing component layout for a 2-speed pump version.
Diagram showing component layout for Hush Pump/Turbo versions.
Details the initial startup sequence and priming mode for the hot tub.
Explains how to adjust and read the hot tub's water temperature.
Describes the function of the warm and cool buttons for temperature setting.
Explains Standard, Economy, and Sleep modes for heating the hot tub.
Details how to operate Massage 1 and Massage 2 jet pumps.
Explains the operation of the optional Turbo feature and the hot tub light.
Describes how to activate and use standby mode for maintenance or quiet operation.
Instructions on how to invert the control panel display for easier reading.
Explains how to lock the control panel to prevent unauthorized operation.
Details how to lock the set temperature to prevent accidental changes.
Allows users to hide maintenance reminders from the system display.
Option to change temperature display from Fahrenheit to Celsius.
Option to change time display from 12-hour to 24-hour format.
Instructions for putting the ET-70 control panel into standby mode.
Instructions for putting ET-50 and ET-30 control panels into standby mode.
Details the initial startup sequence and priming mode for the ET-70 panel.
Explains how to adjust and read the hot tub's water temperature via ET-70.
Explains Standard, Economy, and Sleep modes for the ET-70 panel.
Details operation of Massage 1 and Massage 2 jets on ET-70.
Instructions for turning the hot tub light on and off.
Explains how to activate the optional Turbo feature for increased air flow.
Guide to programming time clock and filter cycles on ET-70.
Details the initial startup sequence and priming mode for the ET-50 panel.
Explains how to adjust and read the hot tub's water temperature via ET-50.
Explains Standard, Economy, and Sleep modes for the ET-50 panel.
Details operation of the jet pump (Massage) on ET-50.
Instructions for turning the hot tub light on and off.
Explains how to activate the optional Turbo feature for increased air flow.
Instructions for customizing filter cycle settings on ET-50.
Details the initial startup sequence and priming mode for the ET-30 panel.
Explains how to adjust and read the hot tub's water temperature via ET-30.
Explains Standard, Economy, and Sleep modes for the ET-30 panel.
Details operation of the jet pump (Massage) on ET-30.
Instructions for turning the hot tub light on and off.
Explains how to activate the optional Turbo feature for increased air flow.
Instructions for customizing filter cycle settings on ET-30.
Recommended pH range for balanced hot tub water.
Recommended sanitizer (chlorine/bromine) levels for safe water.
Recommended calcium hardness levels for hot tub water.
Recommended total alkalinity range for water balance.
Maintaining adequate sanitizer levels to prevent issues like cloudy water and skin irritation.
Importance of balancing pH and alkalinity for water quality and equipment protection.
Managing calcium hardness to prevent cloudy water or scaling.
Use of metal sequestering, scale inhibitor, clarifier, and enzymes.
Explains Beachcomber Modes A, B, and C for zoned lighting control.
Describes how to freeze the light on a specific color or blend.
Details the random cycling mode that mimics a heartbeat.
Instructions for activating natural white light mode.
How to clean the hot tub's acrylic surface using Tub Clean.
Care instructions for the vinyl heatshield to prolong its life.
Maintenance for the Enviroskirt cabinetry and optional cedar cabinets.
How to remove, reinstall, and adjust Energ-Jets™™ for personalized massage.
Explanation of how air control valves adjust massage intensity by adding air.
How to divert water flow between RFM foot jets and seat jets.
Information on operating the optional QSS audio system with CD player.
Details on standard and EverLite™™ LED lighting, including replacement.
How to control the water flow of the optional waterfall feature.
Explains the purpose and benefit of the optional Turbo feature.
Information on the ozone generator for water purification.
Details the ClearTech UV system for water sanitization.
Information about the quiet, low-amperage circulation and filtration pump.
Instructions for preparing the hot tub for short periods away.
Procedures for maintaining the hot tub during longer absences.
Explains how the hot tub protects against freezing temperatures.
Advice on what to do if equipment malfunctions during freezing weather.
Key recommended actions for hot tub operation and maintenance.
Key actions to avoid to prevent damage or injury.
Guarantee for the hot tub's structural fiberglass composition against leaks.
Guarantee for the acrylic finish against defects in materials and workmanship.
Guarantee for factory-installed components for two years.
Guarantee for items like heatshield, jets, and filters for two years.
Details on transferring the remaining guarantee to a new owner.
Guarantee for the hot tub's structural fiberglass composition against leaks.
Guarantee for the acrylic finish against defects in materials and workmanship.
Guarantee for components like pumps and motors for five years.
Guarantee for the Energy Saver Heater Element Assembly for five years.
Guarantee against leaks in internal/external plumbing and light lenses.
Guarantee for the Enviroskirt cabinetry against defects.
General| Heater | 4kW |
|---|---|
| Voltage | 240V |
| Amperage | 50A |
| Shell Material | Acrylic |
| Water Capacity | 450 gallons |
| Filtration | Dual filters |
| Warranty | 5 years |
| Seating Capacity | 6-7 Adults |
To Next Page
