9
XLR 3-pin male and female connector Canon.
Important Note: 2-pole line can not be with each other or in contact with
the metal shell of the connector. Shield to pin 1 must sleeve wrapped.
Menu
Menu
Menu
Menu settings
settings
settings
settings
Using the menu:
1. Boot display the main screen, press the black knob center once, the
main menu appears on the display , enter the main menu setting items ,
the main
Menu set of nine, are: 1. Exit ; 2.dmx address ; 3 . Parameter settings; 4
options; 5 display settings;
Manual control; 7. Test run; 8 Restore factory mode; 9 lamps restore .
2. By rotating black knob confirm the displayed value, or activate the
display function , or to enter the continuous menu . Clockwise menu
The display items incrementing ( auto-repeat ) , or pass on an item in the
menu . Counterclockwise menu display decreasing significantly
Shows ( automatic repeat ) or delivered to the menu on a project . Press
to exit back to the main interface , each setting item has a return value ,
Press Back to return to the previous menu.
a) Quit
b) DMX address :1 -512
c) parameter settings
i. return
ii control mode
1 . Standard mode
2 . Expansion mode
3 Compact Mode
iii. Lamps Model
d) option is set
i. return
ii. X Backward
( 1 ) YES
(2) N O
iii. Y Backward
( 1 ) YES
(2) N O
iv. XY exchange
( 1 ) YES
(2) N O
v bulb control
( 1 ) ON
( 2 ) OFF
vi power-on lamp status
( 1 ) OFF
To Next Page
Loading...
