C. MANUAL UV MODE
Switch the unit on and press the MENU button until “rXXX” is displayed you are in first dimming mode. Press the UP
and DOWN buttons to adjust intensity of the LEDs and confirm setting by pressing the ENTER button. When “gXXX”
is displayed you are in second dimming mode, “bXXX” is third mode, “uXXX” is fourth mode.
D. AUTO/SOUND MODE
Auto Mode: There are 3 types of Auto Modes to choose from;
- Instant (PXXX)
- Smooth (LXXX)
- Fade (EXXX)
The running speed is adjustable in all 3 modes (000-255).
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.
Make sure the area below the installation place is free from unwanted persons during servicing
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any
deformation
The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
To Next Page
Loading...
