To Next PageTo Next Page
Need help?Do you have a question about the BE&SCO Beta 900 Tortilla Oven and is the answer not in the manual?
General| Manufacturer | BE&SCO |
|---|---|
| Model | Beta 900 |
| Type | Tortilla Oven |
| Material | Stainless Steel |
| Heating Elements | Electric |
Critical safety notice regarding power outages and oven shutdown procedures.
Safety instructions on storing flammable liquids near the appliance.
Warning about improper installation, adjustment, alteration, or service.
Specifies qualifications and responsibilities for installation personnel.
Details voltage, cycles, phase, amperage, and power usage requirements.
Guidance on wiring, compatibility, and adherence to electrical codes.
Provides detailed specifications for natural gas usage, pressure, and heating values.
Explains controls for power, oven section, and related components.
Details controls for the flour tortilla and DLT/Palm Sander sections.
Step-by-step guide for safely starting the oven section, including pilot lighting.
Instructions for starting the Midwedge and useful operational tips.
Guidance on preparing, dividing, rounding, proofing, and thawing dough balls.
Solutions for dough balls that are sticky or have proofing issues.
Addresses issues with dough mix consistency and proofing durations.
Step-by-step instructions for operating the machine to produce tortillas.
Solutions for issues like broken edges, grainy appearance, and size variations.
Addresses problems with tortilla shape, size, crumbling, and folding.
Solutions for sticking issues, pressing problems, and build-up on press plates.
Solutions for press plate sticking, pressing problems, and heavy dark build-up.
List of recommended cleaning supplies and an introduction to the cleaning process.
Essential safety precautions to follow before and during the cleaning process.
Detailed steps for cleaning the oven, slides, scrapers, and plates.
Steps and precautions for safely removing stuck tortillas during production.
Table listing common mechanical and oven issues, their causes, and solutions.
Daily, weekly, and preventative maintenance tasks for the Beta 900 oven.
Schedule for lubricating and checking cone bearings and seals.
Maintenance schedule for the Midwedge press, including daily, weekly, and periodic tasks.
