ALWAYS CHECK THE LOOSE PARTS :
You have purchased a kit of the BC201 . is kit box packed with care . If, aer the
checking nevertheless appear that parts are missing or damaged , please within 7 days, preferably by email to
contact us . If necessary, take photos and send it along .
We will contact you as soon as possible .
You have chosen a kit box . e supplier is responsible for the supplied loose
parts. You are responsible for assembling !
Use only the screws ! ese are made of stainless steel and do not rust .
Use only a Canadian Bitje , guaranteed to turn the screws otherwise broken.
Use for bonding only Tec7 . is adhesive is suitable for indoor and outdoor use . In all weathers . Always
bonding portion light rub , not both parts !
Cedar wood is light and delicate. So beware of dents . Tighten the screws . But beware : xed is xed !
If you follow the above steps carefully , you can mount the seat in a good way . We wish you much fun with the
bear chair , and refer to service to our website .
team of Bear chair Europe
Conditions of self-assembly.
Bear chair Nederland
Postbus 500
3700 AM Zeist
info@the-bearchair.nl
www.the-bearchair.nl
0343-513741
11.
6.
7.
3 mm drill Canadian bitjeµ
To Previous Page
Loading...