BEARWARE 303457 - Projection and Display Features; Projection Functionality; Display Information Details

26 English
7.4 Projecon
The "PROJECTION ON / OFF" switch at the back of the device allows you to
turn on the projecon permanently (ON posion) or by pressing a buon (OFF
posion).
In the "OFF" posion", you can turn on the projecon for 5 seconds by pressing
"ALARM / SNOOZE ".
Press the "Projecon Flip" buon to rotate the projecon by 180°. You can move
the projector forward or backward to obtain the desired projecon angle.
8. Display
Time display:
The me can be displayed in a 12-hour or 24-hour format. The desired format can
be selected in the basic sengs.
Date and day:
The weather staon has a date and day display. The day is marked with "D" and
the month with "M".
DCF symbol:
The weather staon synchronises the me every night. The symbol begins ash-
ing during synchronisaon. If the me has been successfully received, then the
symbol glows connuously unl the next synchronisaon.
Indoor temperature display:
The indoor temperature is measured by the base staon and is shown to an ac-
curacy of one tenth of a degree. The congured temperature unit is displayed to
the right of the measured value. The temperature unit can be changed between
°C and °F. To do this, slide the °C / °F switch on the back of the weather staon to
the desired posion.