BEARWARE 303530 - Altitude Correction Settings

24 English
In this way, you can change and customise the following sengs in the sequence
menoned below:
• Time zone
• Language seng - To set the day on the display. The following
codes can be congured and selected using the "UP" and "DOWN"
buons: GER (German), FRE (French), ITA (Italian), DUT (Dutch),
SPA (Spanish), DAN (Danish), ENG (English)
• Year
• Day/month format
• Month
• Day
• 12 or 24 hour display
• Hour
• Minute
• Second
8.1 Altude correcon sengs
This weather staon can congure dierent operang altudes, as the pressure
varies depending on the altude. The default altude is 0m above sea level.
1. in the default screen, press the "MODE" buon 3 mes to access the al-
tude adjustment mode. The screen displays only the altude value.
2. Press and hold the "SET" buon for about 3 seconds in the altude adjust-
ment mode to congure the altude correcon seng. The congured
altude ashes in the display.
3. Press the "UP" and "DOWN" buons to change the altude correcon
value.
4. During the setup, you can press the "MODE" buon to change the current
altude unit. The air pressure unit which is displayed in the default screen
changes along with the length unit to "M/hPa" or "Ft/inHg".
The altude correcon range is -90m to 1990m.
When the setup is complete, press the "SET" buon to conrm the altude cor-
recon seng or wait for 10 seconds unl the menu closes automacally.