BEARWARE 304273 - Page 23

23English
Low baery:
If the baery symbol appears, then the inserted
baeries are discharged and should be replaced with
new baeries as soon as possible. This applies for the
outdoor sensor as well as the base staon.
Outdoor temperature display:
The outdoor temperature is measured by the
outdoor sensor and shown to an accuracy
of one tenth of a degree. The congured
temperature unit is shown to the right of the
measured value. The temperature unit can
be changed between °C and °F. To do this,
press the "MAX/MIN" buon on the front
of the weather staon. The temperature
on the display of the outdoor sensor can be
toggled using the °C / °F buon in the baery
compartment of the sensor.
Channel display
The weather staon receives the signal of the outdoor sensor
automacally aer all sengs have been congured. You can switch
between the dierent channels using the "CHANNEL" buon. The
channels of the outdoor sensor can be selected on the device directly
using a toggle switch.
Frost alarm
Using the temperature alarm, the base staon will emit an
alarm if the sensor reading is outside this temperature range.
The status of the indoor and outdoor alarms is shown using
these icons.