BEARWARE 304304 - Alarm Setting and Management; Setting Specific Alarm Times; Turning Alarms On and Off

29English
• 12/24 hour format
• Hour
• Minute
• Year
• Month / Day format
• Month
• Day
• Time zone - Note: If you set the me zone, for example, to + 01 and the weath-
er staon is actuated using the DCF-signal, then the clock displays one hour
later than the DCF-signal.
• Language seng - To set the day on the display. The following codes can be
congured and selected using the "CH/+" and "-" buons: EN (English), RU
(Russian), NL (Dutch), IT (Italian), ES (Spanish), DE (German), FR (French)
• RC - Enable or disable the DCF signal funcon.
• DST - Enable or disable automac switching to daylight saving me.
• Weather forecast - Switching the air pressure-based weather forecast on or
o.
7.2 Alarm seng
Seng the alarm
Press the "TIME SET" buon to view the alarm instead of the date. Press and then
hold the "ALARM" buon ll the corresponding alarm me starts ashing.
You can make the desired sengs using the "CH/+" and "
_
" buons. Then press
the "ALARM" buon again to save the alarm seng. The alarm is acvated auto-
macally aer seng the alarm me.
Turning the alarm on / o
Press the "ALARM" buon in me mode. An alarm symbol appears next to the
me. This means that the alarm is turned on. Press the “ALARM” buon again to
turn on alarm 2. Press the buon a third me to turn on both the alarms. Press
the buon a fourth me to turn o the alarm. The acve alarms are displayed
next to the me. If an alarm symbol is not shown on the display, then the alarm
is turned o.