BEARWARE 304950 - Manual Switching On and Off; Operating Modes (ON;AUTO;OFF)

19English
5. Repeat step 2 and 3 to program the other sengs. Press and hold the
buon for 2 seconds to scroll through the programs quickly.
6. Aer compleng the sengs, press the "C+" buon to return to the Time
mode.
Example
Switching the mer on every day of the week at 17:15 hrs and switching it o at
22:30 hrs.
Programming the on-me (17:15 hrs)
1. Press the buon once and release it. The LCD display shows 1
ON
--:--.
2. Press the "W+" buon ll the LCD display shows "MO, TU, WE, TH, FR, SA,
SU" above the me.
3. Press "H+" ll the LCD display shows "5:00 pm" or "17:00" (depending on
whether you have enabled the 12 or 24-hour display).
4. Press "M+" ll the LCD display shows "5:15 PM" or "17:15".
5. Press the buon again and release the buon. The LCD shows 1
OFF
--:--.
Programming the on-me (22:30 hrs)
6. Press the buon again and release the buon. The LCD shows 1
OFF
--:--.
7. Press the "W+" buon ll the LCD display shows "MO, TU, WE, TH, FR, SA,
SU" above the me.
8. Press "H+" ll the LCD display shows "10:00PM" or "22:00" (depending on
whether you have enabled the 12 or 24-hour display).
9. Press "M+" ll the LCD display shows "10:30PM" or "22:30".
8. Switching on and o manually
You can manually switch on and switch o the device connected to the mer
using the ON/AUTO/OFF mode or enable the automac control according to the
congured mer programs again.
Press the "MANUAL" buon briey to change between the dierent modes. The
display changes between "AUTO", "ON" and "OFF".