11 FAQ
11.1 What type swimming pool is suitable?
Available for all shapes of pools, and pools of vinyl, fiberglass, ceramic and other materials.
11.2 Why does the robot not move or move slowly at the pool floor?
Please turn off the pool circulation or heating system before cleaning.
The robot may be stuck by the drain or other obstacles on the pool floor. If it does not get out of the
trap successfully after a few minutes, please help it manually by using the hook. And the robot will
resume cleaning after getting out of the trap.
If the pool is too dirty, the robot will
quickly suction up debris and sludge. Please check the filter
basket promptly to see if it needs cleaning.
11.3 Why is there water in the new machine?
As each machine needs to undergo strict testing before leaving the factory, including underwater testing,
etc., there will be a small amount of residual water stains, which is normal, please feel free to use it.
In cases where the connection between the pool floor and walls is curved or the pool shape is too com-
plex, the robot will switch to DeepSense Mode for a better cleaning.
11.5 Why doesn't the robot follow the S-shaped path during pool floor cleaning?
11.4 Why does it take so long for the robot to enter the water?
14
The robot needs some time to release the air in the floating chamber when it enters the water. Please
wait patiently for about 3 minutes.
EN
10 Storage
Find an appropriate indoor storage space that is cool, dry, and shielded from direct sunlight, rain,
frost.
Keep the robotic pool cleaner away from extreme temperatures, open flames, and places accessible
to children.
Properly protect it from dust when stored for a long period of time.
Power off and disconnect it from the power source when storing. Please check the battery level at
least every 6 months and charge the battery to around 50%.
After each use, ensure that the water inside the robot has been completely drained out and that it is
dry. To enable draining, press and hold the "Pro Mode" button for 3 seconds. Please wait for about 3
minutes for the robot to finish draining.
To Next Page
Loading...
