Need help?Do you have a question about the Beatbot AquaSense Pro and is the answer not in the manual?
General| Pool Type | In-ground and above-ground pools |
|---|---|
| Waterline Cleaning | Yes |
| Remote Control | App-controlled via Wi-Fi |
| Obstacle Avoidance | Yes |
| Type | Robotic |
| Power Source | Battery-powered |
| Filter Type | Fine filter |
| Cable Length | Cordless |
| Smart Features | App control, scheduling |
| Warranty | 2 years |
Read all safety warnings and instructions before using this electrical equipment.
General precautions for safe operation, battery handling, and environmental conditions.
Separation distance requirements for FCC/IC RF exposure compliance during device operation.
Instructions for enabling and disabling CEC Mode using the 'ECO Mode' button.
Specifications for pool water parameters: chlorine, pH, temperature, salt, depth, and ingress.
Visual identification of the robotic pool cleaner, charge dock, and hook included in the package.
Diagram labeling all parts of the robotic pool cleaner and its accessories.
Details on model, voltage, run time, charging, capacity, frequency, power, and temperature.
Explanation of how to use the power button and switch between cleaning modes.
Procedures for configuring hotspot and restoring factory default settings.
Guide to downloading the Beatbot app and connecting the robot via Wi-Fi.
Instructions for installing the charge dock, connecting power, and placing the robot to charge.
Step-by-step guide for installing the optional clarifying agent kit.
Pre-cleaning checks: power, mode selection, and calibration before entering water.
Information on cleaning paths and tips for optimal performance and lifespan.
Removing the robot from the pool and cleaning the filter basket.
Explanation of different light indicators and their meanings.
Description of light patterns for power status and selected cleaning modes.
Steps for cleaning foreign objects, water outlets, wheels, propellers, and sensors.
Information on clarifying agent kit, filter basket, and roller brush replacement.
Recommendations for storing the robot to maintain its condition and battery life.
Details on the types of swimming pools compatible with the robot.
Troubleshooting why the robot may not move or move slowly in the pool.
Explanation for the presence of residual water in a new unit.
Reasons for delayed water entry and deviations from the S-shaped cleaning path.
Troubleshooting why the APP may not display a map after cleaning.
Steps for performing Over-The-Air firmware upgrades for the robot.
Solutions for common problems like the robot being offline or not charging.
Explanation of normal operational noises and stopping behavior in ECO mode.
Details on warranty policy, contact information, and environmental disposal guidelines.
To Next Page