Beatbot AquaSense Pro - APP; App Download and Robot Connection

7
6 APP
Please check the following items before connecting:
Make sure the robot is turned on;
Confirm that both your mobile phone and the robot are within the same Wi-Fi coverage range with a
strong signal;
Bring the phone close to the robot (the distance between your phone and the robot should be within 1m).
Connect the robot:
A. Scan to add (recommended): Tap the "Scan to Add" on the home page of the APP, aim the camera at the
QR code on the robot, and follow the APP instructions to complete the connection.
B. Add manually: Tap the "Add Device" on the home page of the APP, choose your robot model, and follow
the APP instructions to complete the connection.
6.1 Instructions for Using the APP
You can either scan the QR code below or search for "Beatbot" in the App Store or Google Play to
download the APP.
APP Download
Robot Connection
B
1m
OR
2.4GHz
A
Ensure your phone is connected to Wi-Fi, supporting only the 2.4GHz network;
You can choose either of the following methods to complete the connection.
EN