To Next PageTo Next PageWhy won't the contact switch on my Beck Switch?
The Beck Switch contact may not switch because of a defective diaphragm, in which case you should replace the pressure switch. Alternatively, a defective spring, a blocked pressure connection, or pressure outside the working range could be the cause.
Essential safety guidelines, including warnings for explosive areas and environmental protection.
Details the intended applications for the differential pressure switches in various environments.
Confirms compliance with European directives, including ATEX and RoHS.
Information on the environmentally friendly and recyclable packaging materials used.
Guidelines for maintaining product integrity during storage and transit, including temperature limits.
Guidance on selecting the optimal installation location and performing initial setup.
Details on making pressure and electrical connections, with specific ATEX considerations.
Instructions for adjusting pressure ranges and switching differentials using the device.
Recommendations for inspection and maintenance schedules based on usage and regulations.
A guide to identifying and resolving common faults and issues with the pressure switch.
Guidance on the proper disposal of the equipment and its components according to regulations.
Comprehensive technical specifications, ratings, and physical dimensions of the device.
Visual representations of the product and its associated mounting brackets and connection kits.
Official statement confirming the product's adherence to relevant EU directives.
Documentation detailing the EC type examination certificate for explosion protection.
Summary of explosion protection compliance, including application area and intrinsic safety.
General