To Next PageTo Next PageWhy won't the contact switch on my Beck 930...EX?
The Beck Switch contact may not switch because of a defective diaphragm, in which case you should replace the pressure switch. Alternatively, a defective spring, a blocked pressure connection, or pressure outside the working range could be the cause.
Covers general safety, potentially explosive areas, and environmental protection guidelines.
Adheres to regulations for gas/dust explosion risks, labeling, and ensures safe working conditions.
Pay attention to environmental notes regarding packaging handling and product disposal.
Details the main purpose of differential pressure switches for monitoring air flow and liquid levels.
Confirms compliance with European directives like Explosion protection and RoHS.
Information on environmentally compatible and recyclable packaging materials.
Points to observe to prevent damage during storage and transport, like temperature limits.
Checks before installing equipment, including IP protection, zone definition, and cable routing.
Details the 2 plastic pipe connection pieces for higher and lower pressure.
Covers safety requirements for electrical connections, power supply, cable selection, routing, and earthing.
Details the process of defining application-specific parameters and adjusting pressure ranges.
Defines recommended inspection and maintenance intervals based on local conditions and regulations.
Provides a list of common faults, their possible causes, and suggested remedial measures.
Information on how to dispose of the equipment made from recyclable materials in accordance with legal regulations.
Provides technical specifications, temperature ranges, electrical ratings, and certifications.
Lists different model types with their adjustment ranges, switching differentials, and tolerance bands.
Details the specifications for pressure connections, including external diameter and maximum operating pressure.
Lists various mounting brackets, connection kits, and cable conduits available for the product.
Presents dimensional drawings of the product and various mounting brackets and accessories.
EU Declaration of Conformity for explosion protection directives and ATEX certification.
Details the EC-Type Examination Certificate, including ATEX labeling and compliance with essential safety requirements.
Summarizes compliance with explosion protection regulations, including application area, explosion group, and intrinsic safety requirements.
General