Becker ATC 2000 - User Manual

GECI<E~
AVIONIC SYSTEMS
Transponder
ATC 2000
Installation and Operation
Manual DV 880.04
Issue 0
September 1980
Change 2 August 1992
Becker Flugfunkwerk GmbH • Baden Airpark • Gebaude B 108
77836 Rheinmünster • Telefon 07229/305-0
E-Mail: info@becker-avionics.de or support@becker-avionics.de
The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary

General Information

Application Overview

Technical Specifications

Details the performance parameters, electrical data, and dimensions of the ATC 2000.

Installation Procedures

Pre-Installation Checks

Step-by-step procedures to verify the unit's condition before aircraft installation.

Aircraft Wiring and Connections

Transponder Antenna Installation

Guidelines for fitting the DMNI 70-1 or ANT 2000 antennas to the aircraft.

Post-Installation Testing

Procedures for checking and adjusting the transponder after installation.

Operating Instructions

Control Functions Explained

Operational Modes Guide

Instructions for using the transponder in Built-in TEST, Mode A, and Mode C operations.

Theory of Operation

Interrogation and Reply Pulse Details

Circuitry and Block Diagram

Explains the internal functions of the transponder's main circuit blocks.

Becker ATC 2000 Specifications