Subject to correction and technical modifications 35 Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
• Engage the reverse gear for the reverse signal function test.
)
The arrows under 09,*;065 must change direction on
engaging the reverse gear.
• When using the GPS for the first time, the vehicle must be parked
outdoors, while ensuring that it has a clear view in all directions
(not in the immediate vicinity of buildings).
Information on the GPS reception is given in the right-hand part of
the display.
Four different messages may appear:
-
: GPS reception is already available.
-
$!: It is necessary to wait for GPS reception. You must
wait until
is displayed.
-
!: The GPS antenna is not properly con-
nected.
-
": If this message is displayed, please contact
the hotline.
)
You must wait until , P (or P) and P
(or a higher value) is displayed.
This procedure (first reception of the necessary GPS data)
may take a few minutes. The unit must remain switched on
for the entire duration of this procedure. The vehicle must
not be moved. If after 5 minutes there has been no change
in the values, the parked position (clear view in all direc-
tions as far as possible) or the installation location of the
7,,+ 09,*;065
VVV
$!
P P
P
7,,+ 09,*;065
VMN
P P
P
7,,+ 09,*;065
VMN
$!
P P
P
7,,+ 09,*;065
VMN
!
7,,+ 09,*;065
VMN
"
To Next Page
Loading...
Need help?
General
