Subject to correction and technical modifications 40 Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
The following functions can be selected in the Service Mode:
•
- GPS function test
•
! - function for deleting the calibration or for setting
a calibration
•
! - display for calibration ride
•
"! ! - internal component test
•
- sensor function test
•
! ! - voice test
•
- demo mode selection
•
# - the status of the Navigation CD is displayed
By turning the right rotary control , select the desired entry
(large letters) and press to confirm.
)XQFWLRQWHVWRI*36DQWHQQD
In Service Mode, select
S with the right rotary control and
press to confirm.
If functioning properly and with GPS reception, the number of satellites
received (e.g.
), the date and time (e.g. YYPP ) and the
type of positioning currently possible
%P (e.g. ) are displayed.
)
At least % is required for quick and successful cali-
bration. A certain amount of time may be required to reach
this value (do not move the vehicle during this period).
In order to quit the GPS test, press the button. The unit switches
back to the Service Mode.
#
!
#
!
PPPP
%%P
Y&P
1DY
To Next Page
Loading...
Need help?
General
