Subject to correction and technical modifications 43 Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
Enter the correct tyre size using the right rotary control and confirm the
entry by pressing for more than 2 seconds.
)
The letter "R" cannot be entered. 3 numbers must be en-
tered before and after the slashes. Insert a "0" for any miss-
ing numbers.
Example:
Specification in vehicle registration papers: 185/55R15
81T
Input into unit: 185/055/015
Then select between
$!&! and " !&! by
turning the right rotary control to enter the approximate tread depth
value.
Press the right rotary control to confirm the selection.
The previously entered data is displayed once more. If the data entered
is correct, press the right rotary control .
If correction is necessary, select
& by turning the right rotary
control and press to confirm. The values can then be re-entered.
After confirming the tyre data or the previously confirmed point
!!
!
, the adjacent display appears.
After a short time, the unit switches to the main navigation menu or the
calibration ride is requested.
)
The unit is now in calibration status 2. Absolute precision
is, however, only achieved as of calibration status 3.
"!!& P
!& 'TTTFTTTFTTT
GLQH
" !&!GLJH
MTQYVQQYVMQN
&
"!
To Next Page
Loading...
Need help?
General
