Becker DVX 3.100 User Manual

MIN 2m
129 kg
285 lbs
DVX 3.100
MAX.
VACUUM
MAX.
V
m /h
3
mbar
MAX.
PRESSURE
Made in Germany
year
No
min
-1
kW
m /h
3
mbar
mbar
type
speed
power required
inlet capacity
vacuum
pressure
+
-
Hz frequency
D-42279 Wuppertal
www.becker-international.com
WN 87.1-19
Made in Germany
year
No
min
-1
kW
m /h
3
mbar
mbar
type
speed
power required
inlet capacity
vacuum
pressure
+
-
Hz frequency
D-42279 Wuppertal
www.becker-international.com
WN 87.1-19
L = 77 dB(A) - 50Hz
L = 78 dB(A) - 60Hz
K
= 3 dB(A)
pA
pA
pA
DIN EN
ISO 3744
A > 100mm
A > 4"
> 5°C/41°F
< 45°C/113°F
max.
800m
max. 90%
%
A
A
A
A
AIR
28100050803 01/15
www.becker-international.com
1
2
2006/42/EG
DIN EN ISO 9001
001929 QM
DIN EN ISO 14001:2005
Betriebsanleitung
Operating Instructions
Instructions de service
Istruzioni d’uso
Handleiding
Instrucciones para el manejo
Manual de instruções
Naudojimosi instrukcija
Kasutusjuhend
Lietošanas instrukcija
Driftsinstruks
Driftsinstruktioner
Käyttöohje
Driftsvejledning
Instrukcja obsługi
Kezelési útmutató
Návod k obsluze
Navodilo za uporabo
Návod na obsluhu
Upute za rad
Manual de operatii
Treoracha Oibriúcháin
Οδηγίες χρήσης
El Kitabi
Инструкции за експлоатация
Инструкция по эксплуатации
取扱説明書
사용설명서
使用说明书

Becker DVX 3.100 Specifications

General

Brand	Becker
Model	DVX 3.100
Category	Water Pump
Language	English

Summary

BECKER DVX 3.100 Product Overview and Specifications

Safety Symbols and Warning Icons

Key safety symbols and warning icons used in the manual.

Technical Data and Performance Metrics

Detailed technical specifications, performance metrics, and operating limits of the product.

Electrical Connection and Initial Setup

Required Tools for Installation

List of tools necessary for the installation and connection procedures.

Electrical Wiring and Motor Connection

Guide to electrical wiring, motor connection, and safety precautions during setup.

Basic Operation Controls

Instructions for basic operation using ON/OFF controls.

Installation Connections and Safety Precautions

Pressure and Vacuum Port Connections

Diagrams illustrating the correct connections for pressure and vacuum ports.

Personal Safety and Protective Gear

Essential safety precautions and required personal protective equipment (PPE).

Air Filter Requirements

Specification for the required air filter standards (EN149, 42 CFR 84).

Filter Replacement Procedures

Filter Set F1=F2 Replacement

Step-by-step guide for replacing filter set F1 and F2.

Filter Set F3 Replacement

Instructions for replacing filter set F3, including part numbers.

Maintenance and Lubrication

Shaft Seal Inspection and Replacement

Procedure for checking shaft seal wear and maintenance interval (7500 h).

Cleaning and Lubrication Instructions

Guidelines for cleaning the unit and applying special grease (2000 h interval).

Cleaning, Tightening, and Service Information

Cleaning with Compressed Air

Method for cleaning the unit using compressed air.

Component Tightening Torques

Specific torque values for tightening various components (A, B, C).

Service and Contact Information

Contact details for BECKER GmbH service, sales, and support network.