Becker U 4.100 User Manual

67,5 kg
148,8 lbs
U 4.100
MAX.
V
m /h
3
Made in Germany
year
No
min
-1
kW
m /h
3
mbar
type
speed
power required
inlet capacity
max. vacuum
Hz
frequency
D-42279 Wuppertal
www.becker-international.com
MAX. V
L = 67,5 dB(A) - 50Hz
L = 69 dB(A) - 60Hz
K = 3 dB(A)
pA
pA
pA
DIN EN
ISO 3744
MAX.
-p
VACUUM
mbar
Made in Germany
year
No
min
-1
kW
m /h
3
mbar
type
speed
power required
inlet capacity
max. vacuum
Hz
frequency
D-42279 Wuppertal
www.becker-international.com
MAX. VACUUM
A > 100mm
A > 4"
> 5°C/41°F
< 40°C/104°F
max.
800m
max. 90%
%
A
A
A
A
AIR
Oil
Becker Lube
M/S/SL 100
� 2,0 Liter
28100026200 01/10
www.becker-international.com
Betriebsanleitung
Operating Instructions
Instructions de service
Istruzioni d’uso
Handleiding
Instrucciones para el manejo
Manual de instruções
Naudojimosi instrukcija
Kasutusjuhend
Lietošanas instrukcija
Οδηγίες χρήσης
Driftsinstruks
Driftsinstruktioner
Käyttöohje
Driftsvejledning
Instrukcja obsługi
Kezelési útmutató
Návod k obsluze
Navodilo za uporabo
Návod na obsluhu
El Kitabi
Инструкция по эксплуатации
1
2
2006/42/EG
DIN EN ISO 9001
001929 QM
DIN EN ISO 14001:2005
All manuals and user guides at all-guides.com

Becker U 4.100 Specifications

General

Brand	Becker
Model	U 4.100
Category	Water Pump
Language	English

Summary

Product Overview and Safety Information

General Safety Warnings and Symbols

Highlights essential safety symbols and warnings for safe operation and handling.

Technical Specifications

Details key technical parameters including vacuum, flow rate, noise, weight, and certifications.

Installation and Electrical Connections

Oil Filling Procedure

Instructions for filling the oil reservoir with specified Becker Lube types.

Electrical Wiring and Motor Specifications

Details on electrical connection diagrams and motor specifications for different power supplies.

Sensor Connections (Pt 100/TMAX)

Guide for connecting optional temperature sensors Pt 100 and TMAX.

Operational Setup and Parameters

Air Intake and Filter

Information on air intake, filter requirements, and optional accessories for air intake.

Hose and Pressure Connections

Details on connecting hoses and pressure lines, including length considerations.

Vacuum and Volume Characteristics

Illustrates the relationship between absolute pressure and volume.

Maintenance Procedures

Regular Maintenance Checks

Routine checks for safety and operational status, including oil level and speed.

Oil Change and Refill

Detailed steps for performing oil changes at specified intervals and refilling the oil.

Scheduled Maintenance and Part Replacement

Air Filter Maintenance

Instructions for cleaning or replacing the air filter at scheduled intervals.

Component Replacement Intervals

Guidance on replacing specific components at 1000, 2000, and 5000-hour service intervals.

Temperature Monitoring (TMAX)

Information on monitoring the maximum temperature (TMAX) during operation.

Component Details and Support

Specific Part Replacements

Instructions for replacing specific components identified by position numbers.

Service and Contact Information

Contact details for Becker GmbH service and support inquiries.