What to do if defects are visible during inspection of Becker VT 4.40 Water Pump?
If you notice defects or hazards during the inspection of the Becker Water Pump, you must shut down the pump immediately. The pump may only be operated if it is in perfect condition.
General| Brand | Becker |
|---|---|
| Model | VT 4.40 |
| Category | Water Pump |
| Language | English |
Explains signal words and their meanings for danger and information.
Details various warning, hazard, and commandment symbols used in the manual.
Operator responsibilities for ensuring safe working conditions and trained personnel.
Staff's duty to observe safety regulations and operating instructions before work.
Defines the pump's purpose and specifies prohibited uses for operational safety.
Lists prohibited applications and uses for the vacuum pump.
Mandatory personal protective equipment to minimize health hazards during work.
Details specific hazards like electric shock, unexpected start-up, and distances.
Operator's responsibility for safety concepts and safe use of the pump.
Ensures compliance with directives and emphasizes de-energizing for repair work.
Details dangers, rules, and checks for pump safety and protective devices.
Highlights dangers and personnel qualification requirements for electrical installation.
Details motor connection, protection, and approved direction of rotation.
Explains electrical connection for the VX 4.25/0-47 variant using a special connector.
Tables listing common malfunctions, their causes, and recommended solutions.
Importance of regular servicing by qualified personnel for operation and lifespan.
Highlights dangers related to protective devices and hot components during maintenance.
Table detailing key operating parameters for various VT pump variants.
Information on where to find technical data sheets for the pumps.
To Next Page
