To Next PageTo Next Page
Need help?Do you have a question about the Becker KVT 3.140 and is the answer not in the manual?
General| Brand | Becker |
|---|---|
| Model | KVT 3.140 |
| Category | Water Pump |
| Language | English |
Details maximum vacuum and volume flow rate, frequency, speed, power, and rated current.
Presents sound emission data according to DIN EN ISO 11203, including LPA and LDA values.
Specifies minimum dimensions, operating temperature range, and maximum humidity.
Provides product weight and minimum lifting clearance requirements for safe handling.
Details on motor protection switches, service factor, and rated current for safe operation.
Information on the ON/OFF switch and maximum operational cycles per hour.
Explains optional features like softstart, PTC, and bi-metal protection for enhanced performance.
Highlights safety warnings for maintenance, including heat, electrical hazards, and moving parts.
Defines cleaning intervals (40h, 200h) and specifies filter types for air intake.
Illustrates the process for replacing filters (F1, F2, F3) on the unit.
Identifies standard and polyester filter part numbers for replacement.
Lists part numbers for service kits (D2, D3) used in various positions.
Guidance on checking shaft seal wear (Amax, Amin) and replacement part numbers.
Details the steps for cleaning components and applying special grease at 2000h intervals.
Provides torque specifications (Nm) for different screw types (A, B, C) during assembly.
