To Next PageTo Next Page
Need help?Do you have a question about the Becker KDX 3.140 and is the answer not in the manual?
General| Brand | Becker |
|---|---|
| Model | KDX 3.140 |
| Category | Water Pump |
| Language | English |
Identifies the KDX 3.140 model and lists relevant certifications like CE and ISO.
Details maximum pressure, airflow, and noise levels (LPA, KPA) for the unit.
Displays safety warnings, weight limits, and environmental operating conditions.
Lists specific tools and components like screwdrivers needed for installation.
Provides diagrams for connecting the unit's electrical components and motor.
Shows the location and details of the unit's data plate for specifications.
Emphasizes safety precautions like wearing PPE and handling electrical hazards.
Illustrates how to connect the unit to air intake and pressure lines.
Details critical safety practices during operation, including PPE and lockout/tagout.
Covers recommended maintenance intervals and the process for replacing air filters.
Provides essential safety advice, including warnings about hot surfaces and moving parts.
Details the procedure for replacing air intake filter elements F1, F2, and F3.
Identifies specific maintenance kits (Satz/Kit) and their associated part numbers and positions.
Illustrates the process for replacing component D3 at position 104.
Details checks for component clearances (Amax, Amin) and identifies a replacement set.
Illustrates the process for cleaning the unit exterior.
Specifies lubrication intervals (2000 h) and the type of grease required.
Shows assembly steps and specific torque values (Nm) for various components.
Indicates where to find service information and contact details for support.
