Need help?Do you have a question about the Becker ready.5 BE B60 and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Screen Type | TFT LCD |
| Display Resolution | 480 x 272 pixels |
| GPS Receiver | SiRFstar III |
| Voice Guidance | Yes |
| Bluetooth | No |
| TMC | Yes |
| Connectivity | USB |
| Battery Life | Up to 2 hours |
| Audio Output | 3.5mm jack |
| Power Supply | 12V car adapter |
Describes the structure and content of the operating manual.
Explains the intended purpose and basic handling of the device.
Introduces GPS and the core navigation functionality.
Explains Bluetooth connectivity for phone functions.
Provides instructions for safely removing the device from its packaging.
Lists all items included in the product package.
Provides an overview of the device's main components.
Details how to clean and protect the device.
Outlines the initial steps to power on the device.
Explains how to power the device in a vehicle.
Explains the use of micro SD cards for storage and updates.
Guides on attaching the device holder to the windscreen.
Explains how to power the device on, off, or put it into sleep mode.
Describes the primary navigation interface and its options.
Guides through setting up PC software for device management.
Explains how to launch the PC software for device interaction.
Describes how to initiate navigation and select destinations.
Details the step-by-step process for inputting destination addresses.
Explains how to create routes with multiple waypoints.
Explains what Points of Interest are and how to use them as destinations.
Configures map display options like 2D/3D and split screen.
Controls audio prompts, volume, and voice selection.
Configures visual and audible alerts for driving conditions and road signs.
Details how to receive and interpret traffic information via radio.
Explains how the map is presented during active route guidance.
Helps avoid traffic jams by suggesting alternative routes.
Warns about road sections with restrictions based on planned routes.
Shows elevation changes along a route for better planning.
Accesses the device's phone features via Bluetooth.
Navigates through the available phone functions and options.
Manages contact entries for making calls.
Details the process of initiating a phone call.
Explains how to receive and answer incoming calls.
Manages the Bluetooth connection status and pairing.
Adjusts the volume levels for calls and ringtones.
Accesses core device configurations affecting all applications.
Manages device power settings and displays battery status.
Controls the automatic sleep mode based on vehicle ignition.
Allows selection of the display language for the device interface.
Provides information on the proper disposal of electrical and electronic products.
Details the correct disposal procedures for used batteries.
Provides instructions for safely removing the battery from the device.
To Next Page
