EasyManuals Logo
Home>Beckhoff>Desktop>CX2020

Beckhoff CX2020 User Manual

Beckhoff CX2020
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Product overview
2.6 Battery compartment
The battery compartment is located under the front cover of the CX20x0. The opening in which the battery
bracket is mounted can be seen when the front cover is opened. The battery is then pulled carefully out of
the holder with the help of the ejection tab and then removed.
To insert a new battery push it into the battery compartment. Ensure correct polarity. Then close the front
cover. The battery change is then complete.
The battery is a CR2032 type from Panasonic.
The correct specifications are:
Battery type Electrical properties (at 20
°C)
Standard
charge
Dimensions
nominal
voltage
nominal ca
pacity
continuous
load
Diameter Height Weight
CR2032
3.0 V 225 mAh 0.20 mA 20.0 mm 3.20 mm 3.1 g
Attention
An incorrectly inserted battery may explode!
Only use the same battery type (CR2032) from Sanyo or Panasonic. Make absolutely sure
that positive and negative terminals of the battery are inserted correctly. (minus pole on the
left)Never open the battery or throw it into a fire.The battery cannot be recharged.
Notice
Battery maintenance
The battery must be replaced every 5 years. Spare batteries can be ordered from Beckhoff
Ser v i ce [ } 46].
2.7 CF slot
A CFast Flash slot is located at the front, which enables the storage medium to be replaced. This allows the
storage medium to be exchanged. In the basic module this should only be done in switchedoff state,
otherwise the system may crash. The CFast Flash card can be removed from the module for maintenance.
In this way it is also possible to expand the system (only operating system and program memory). CFast
Flash cards (CFast cards) are available as accessories in various sizes.
The following images illustrate the handling of the CFast cards. The eject mechanism is based on the push
push principle: The CFast Flash card is disengaged with a soft click by lightly pressing the card. At the same
time the card moves approx. 4 mm out of the housing, so that it can be pulled out.
CX2020, CX2030, CX204016
Version 1.2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beckhoff CX2020 and is the answer not in the manual?

Beckhoff CX2020 Specifications

General IconGeneral
BrandBeckhoff
ModelCX2020
CategoryDesktop
LanguageEnglish

Related product manuals