Beckhoff CX9001-0101 User Manual

Appendix
CX9000 / CX901054 Version: 2.6
Attention
Starting CERHOST
Via CERHOST the program will be started with a double click on the icon. Warning: Do
NOT start the program if you have no image-Server ( see below) AND a correct image! The
CX90x0 is now no longer useable for PLC until an update was made!The reset to opera-
tional is done automatically if the the update has taken place.
Note
Image Server
Image server will listen in complete network to be contacted by CX90x0 Two solutions to be
sure that you just update your CX90x0 device.... and not others in network ! (for details see
network notes below)
4. Start image server
Start the image server on the host PC :

Beckhoff CX9001-0101 Specifications

General

Brand	Beckhoff
Model	CX9001-0101
Category	Controller
Language	English