Beckhoff CX9001-1001 User Manual

Hardware Documentation
CX9000 / CX9010
Ebedded-PC
2.6
2015-07-10
Version:
Date:

Beckhoff CX9001-1001 Specifications

General

Type	Embedded PC
Ethernet Ports	2
USB Ports	2
Power Supply	24 V DC
Ethernet	10/100 Mbit/s
USB	USB 2.0
Protection class	IP20
Weight	0.5 kg
Operating temperature	-25 to +60 °C
Dimensions (W x H x D)	100 mm x 100 mm x 70 mm
Operating System	Windows Embedded CE 6

Summary

1 Foreword

Safety Instructions and Warnings

Covers safety regulations, exclusion of liability, personnel qualification, and symbol meanings.

2.3 Basic Modules

2.3.1 CX9000-0000 Technical Data

2.3.2 CX9000-1000 Technical Data

2.3.3 CX9010-0000 Technical Data

2.3.4 CX9010-1000 Technical Data

2.3.5 CX9000 Configurations

2.3.6 CX9010 Configurations

2.3.7 Connections

Power Supply Wiring and UL Requirements

Explains power supply wiring, RJ45 pin assignments, and critical UL power connection requirements.

2.3.8 Battery Compartment and Maintenance

2.3.9 CX90x0 Dip Switch Settings

2.3.9 CX90x0 Dip Switch Functions

2.4 System Interfaces

2.4.1 Technical Data for Interfaces

Provides technical data for CX90x0-N010, CX90x0-N030, and CX90x0-N031 interfaces.

2.4.2 CX90x0-N010 Connections

2.4.3 CX90x0-N030 Connections

2.4.4 CX90x0-N031 Connections

2.4.4 RS485 DIP Switch Settings

2.4.4 RS422 DIP Switch Settings

4 Assembly and Connecting

Basic Module Mechanical Assembly

Explains the steps for mechanically mounting the basic CPU module onto a top-hat rail.

UPS Module Installation and Power Handling

Releasing the CX90x0 System Block

Connecting to Terminal Bus

Installation Position and Ventilation

Specifies correct mounting orientation and clearance for adequate module ventilation.

Module Removal from Top-Hat Rail

Details the procedure for safely removing modules from the top-hat rail, starting with terminals.

CPU Module and UPS Assembly

Re-engaging on Top-Hat Rail

4.2 Start-up Procedure

Switching PC On and Off

5 Error Handling and Diagnostics

CPU Basic Module LEDs (E-Bus)

K-Bus Diagnosis via LEDs

Details error codes and their meanings for K-Bus diagnosis using LED blink codes.

Terminal Bus Analysis in PLC Program

Explains how to analyze the terminal bus (K-Bus) using PLC program registers and variables.

System Manager for Terminal Bus Registers

CPU Basic Module LEDs (K-Bus)

7 Appendix: Image Update

Selecting and Locating Firmware Images

7 Appendix: Firmware Files

7 Appendix: Flashing the Operating System

7 Appendix: Image Update Process

7 Appendix: Starting the Update Tool

7 Appendix: Confirming the Image Update

7 Appendix: Image Server Setup

Prepare Image-Server (once)

Lists the components required for the image server setup.

Prepare CX90x0

Explains how to prepare the CX90x0 for the update process, including dip switch settings.

7 Appendix: CX90x0 Preparation for Update

Power Down and Access Dip Switches

Guides through powering down and accessing dip switches for boot-strap mode.

Setting Boot-Strap Mode via Program

Explains alternative methods to set boot-strap mode using a program or tool.

7 Appendix: Initiating the Update via CERHOST

Starting CERHOST Program

Image Server and Network Configuration

Start Image Server on Host PC

7 Appendix: Image Update Phases

Prepare Batch Files for Image Server

Details preparing batch files to provide firmware images from the server.

Initial and Download Phases

Describes the initial phase and download phase of the image update process.

7 Appendix: Copying Files to Hard Disk