Synchronizing Two Foundations with Sync Cord
STEP 1：Unplug foundations from the power source.
STEP 2：Connect the male ends of the sync cord to the female sync plugs of
the control boxes (Refer to below illustration).
STEP 3：Plug foundations back into the power source.
STEP 4：
Check to ensure all cords are securely attached. Either remote will
operate both foundations
simultaneously.
Sync Plug
Sync Plug
Control Box 1 Control Box 2
Sync Cord
HD Motor FT Motor Neck Motor
HD Massage FT Massage
LED PROG APP SYNUSBPower
HD Motor FT Motor Neck Motor
HD Massage FT Massage
LED PROG APP SYN
USB
Power
Wireless Syncing Instruction
UN-SYNC Two Foundations
STEP 1：Make sure both remotes are individualy paired to
the foundation. If the remote is not paired with the
foundation, follow the pairing instructions.
STEP 2：Make sure both foundations are at home (flat
position).
STEP 3：Press and hold HEAD and on both remotes
at the same time for 5 seconds, or/until the blue
BACK LIGHTS FLASH.
Press and hold HEAD and HEAD on both remotes
at the same time for 5 seconds, or/until the blue BACK
LIGHTS FLASH.
Press
and hold
Press
and hold
HEAD FOOT
1
STOP
2
HEAD FOOT
1
STOP
2
Remote Control Instructions
ADJUST
This button lifts the Head/Foot/Neck
section of the base.
This button lowers the Head/Foot/
Neck section of the base.
ONE TOUCH BUTTON
One-touch programmable positions.
2
1
One-touch flat position.
UNDERNEATH LED LIGHTING
One-touch underneath
LED
lighting
on/off.
MASSAGE FEATURES
Turn on the head massage.Cycle
through 3 massage intensities.
Turn off the head/foot massage.
STOP
Turn on the foot massage.Cycle
through 3 massage intensities.
Lifts and
Lowers Head
Lifts and
Lowers Foot
Foot Massage on
（3 Intensity Levels）
Flat Position
Head Massage on
（3 Intensity Levels）
Head/Foot
Massage off
HEAD FOOT
1
STOP
2
Under Bed
LED on/off
Programmable
Positions
- 8 -
To Next Page
Loading...