BedJet V2 - System Operation; BedJet Remote Control

IMPORTANT INSTRUCTIONS
BEDJET USER OPERATING MANUAL
Revision 1.0 www.bedjet.com P a g e | 9
System Operation
BedJet Status Display:
BedJet Remote Control:
BEDJET REMOTE CONTROL LEARNING FUNCTION: The remote control comes already
paired to your BedJet. For re-pairing of the remote or pairing of a new remote control,
make sure BedJet is powered OFF for 10 seconds. Turn BedJet switch ON while
simultaneously pressing and holding the COOL Button on remote control until BedJet Power
ON indicator lights. BedJet will make 3 fast beeps to indicate successful pairing to remote.
Only one remote can be paired to a BedJet base unit at any given time.
Any button pressed LED indicator
Turbo-Heat Mode ON/OFF
Air Flow power increase
Cool Mode ON/OFF
Auto-shutoff timer advance
Normal Heat Mode ON/OFF
Air Flow power decrease
Beeper Mute ON/OFF
Heat Mode ON
Cool Mode ON
Power ON
Bluetooth Smartlink
ON
Air Flow level
(relative to current mode)