Beechcraft Debonair 33 Series - User Manual

ATP
INDEX
COPYRIGHT 2003
COPYRIGHT IS NOT CLAIMED AS TO ANY PART OF AN ORIGINAL WORK
PREPARED BY A UNITED STATES GOVERNMENT OFFICER OR EMPLOYEE AS
PART OF THAT PERSONS OFFICIAL DUTIES OR BY ANY OTHER THIRD PARTY
OFFICER OR EMPLOYEE AS PART OF THAT PERSONS DUTIES.
"ATP" is a registered trademark of Aircraft Technical Publishers. All original
authorship of ATP is protected under U.S. and foreign copyrights and is subject
to written license agreements between ATP and its Subscribers.
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE
REPRODUCED, STORED IN A RETRIEVAL SYSTEM, OR TRANSMITTED IN ANY
FORM BY ANY MEANS, ELECTRONIC, MECHANICAL, PHOTOCOPYING,
RECORDING OR OTHERWISE, WITHOUT PRIOR WRITTEN PERMISSION OF THE
PUBLISHER.

Summary

SECTION 1 INTRODUCTION

The Shop Manual

Provides detailed instructions for experienced mechanics, covering maintenance and operational points for the Bonanza. It aims to be a concise guide for daily shop work.

SECTION 2 GENERAL INFORMATION

Dimensions of Airplane

Provides overall dimensions of various Bonanza models, including length, wingspan, height, and clearance.

Special Tools

SECTION 3 SYSTEMS DESCRIPTION AND MAINTENANCE

Balancing Control Surfaces

Instructions for checking and achieving proper static balance for control surfaces like ailerons, elevators, and rudders.

Balancing the Aileron

Step-by-step guide for balancing the aileron assembly to ensure proper static moment.

Balancing the Elevator

Detailed instructions for checking and achieving proper static balance for the elevator assembly.

Balancing the Rudder

Step-by-step guide for checking and achieving proper static balance for the rudder assembly.

Flap System

Flap Limit Switch Adjustment

SECTION 4 MAJOR DISASSEMBLY

WINGS

Overview of the wing structure, including spars, leading edge, and attach points.

REMOVING THE WING

Step-by-step procedure for removing the main wing assembly.

INSTALLING THE WING

Procedures for installing the main wing assembly.

REASSEMBLY OF MAIN AND NOSE WHEEL

Detailed instructions for disassembling and reassembling main and nose gear wheels.

SECTION 5 MAJOR MAINTENANCE AND OVERHAUL

MAIN AND NOSE WHEEL OVERHAUL

Procedures for overhauling main and nose landing gear wheels, including tire and brake checks.

BRAKES

OVERHAUL OF BRAKES

Detailed overhaul procedures for brakes, including cleaning and part replacement.

DISASSEMBLY OF CLEVELAND BRAKES

Procedures for disassembling Cleveland brake assemblies.

REPLACEMENT OF GOODYEAR BRAKE LININGS

Instructions for replacing Goodyear brake linings for one-pressure cylinder type brakes.

DETERMINING GOODYEAR BRAKE LINING WEAR

DISASSEMBLY OF BEECH BRAKES

Procedures for disassembling Beech brake assemblies.

REASSEMBLY OF BEECH BRAKES

Procedures for reassembling Beech brake assemblies.

BRAKE MASTER CYLINDER REMOVAL AND INSTALLATION

Steps for removing and installing the brake master cylinder.

BRAKE MASTER CYLINDER OVERHAUL

DISASSEMBLY

SECTION VI ELECTRICAL WIRING DIAGRAMS

INDEX OF WIRING DIAGRAMS

LANDING GEAR CONTROL CIRCUIT

Wiring diagram for the landing gear control system.

IGNITION SWITCH

GENERATOR

BATTERY AND STARTER

FLAP CONTROL AND POSITION INDICATOR

STALL WARNING INDICATOR

LANDING GEAR WITH SAFETY SYSTEM (OPTIONAL)

Wiring diagram for the optional landing gear system with safety features.

LANDING GEAR WITHOUT SAFETY SYSTEM

Wiring diagram for the landing gear system without the safety system.

SECTION 7 PERIODIC INSPECTION SCHEDULE

OVERHAUL AND REPLACEMENT SCHEDULE

Lists overhaul or replacement intervals for various aircraft components based on hours or calendar time.

PROPELLER

FUEL SYSTEM

FLAPS AND FLIGHT CONTROLS

WING SPAR CAP INSPECTION

SECTION 8 PERIODIC INSPECTIONS

100-HOUR OR ANNUAL INSPECTION GUIDE

Comprehensive guide for performing 100-hour or annual inspections, covering operational checks and powerplant.

WARNING

OPERATIONAL INSPECTION

Checks for proper operation of various aircraft systems, including starter, fuel system, and magnetos.

POWER PLANT

CABIN AND BAGGAGE COMPARTMENT

D. WINGS AND CARRY-THROUGH STRUCTURE

NOSE GEAR

MAIN GEAR AND BRAKES

MAIN GEAR OPERATION

NOSE GEAR OPERATION

REAR FUSELAGE AND EMPENNAGE

Beechcraft Debonair 33 Series Specifications

General

Brand	Beechcraft
Model	Debonair 33 Series
Category	Tools
Language	English