Fitting the drip tray
The drip tray (11) must be installed before using the appliance.
Proceed as follows to install the drip tray:
Position the drip tray in front of the appliance so that the ar-
u
row on the drip tray and the arrow on the appliance base are
aligned.
Lift the appliance slightly.
u
Push the drip tray under the appliance so that the groove in u
the drip tray fits under the edge of the appliance base.
Lower the appliance again and the drip tray is clamped under
u
the edge of the base.
Place the cover (12) onto the drip tray. u
Operate delivery tap
To draw water from the water tank, proceed as follows:
Touch mode
Press the lever (17) downwards. The delivery tap (16) opens. To
close the delivery tap again, simply release the lever.
To Next Page
Loading...
