NOTE
To remove the lid, first turn the lid in anti-clockwise direction
►
towards the symbol to unlock the lid and then simply lift
off the lid.
NOTE
The lid locking device is installed only on the model series
►
3005, 3006 and 3008.
Switch on appliance
Fill the water tank with the required amount of water, but not u
higher than the Max. mark on the tank.
Place the lid onto the water tank (see chapter
u Close water
tank with lid).
Place the teapot on the water tank.
u
NOTE
Ensure that the rotary knob is turned completely in anti-
►
clockwise direction. Only then insert the plug into the plug
socket.
Turn the rotary knob in clockwise direction until the desired u
setting is reached.
The thermostat permits a stepless setting of the water tempera-
ture. You have the choice between the following settings: warm,
hot, boiling (intermittent boiling).
Warm/hot
If you turn the rotary knob to position or , the water will
be heated to the corresponding temperature and then held at this
temperature.
Boiling
If you turn the rotary knob completely in clockwise direction to po-
sition
, the water will be boiled quickly. If you leave the rotary
knob in this position, the water will boil continuously until it has
completely evaporated.
To Next Page
Loading...
