Beem FRESH-AROMA-PURE

Questions and Answers

S
Sean MorganAug 15, 2025
Why does coffee run very slowly into the jug in my Beem Coffee Maker?
- B
  Brandon LongAug 16, 2025
  If the coffee runs very slowly into the jug of your Beem Coffee Maker, it might be due to several reasons. The drip stop could be blocked, so clean the filter holder. The device may need descaling, or the sieve could be blocked, requiring cleaning. Alternatively, the coffee powder might be too finely ground, or you might be using too much coffee. Try using a coarser grind and ensure you don't exceed the maximum filling quantity.
D
Debra CardenasAug 18, 2025
How to fix a Beem FRESH-AROMA-PURE Coffee Maker when nothing is shown on the display?
- J
  Jennifer SmithAug 18, 2025
  If nothing is shown on the display of your Beem Coffee Maker, first, ensure the mains plug is correctly inserted into the plug socket. If it still doesn't work, try another plug socket in case the original one is defective. Finally, check the fuse of the mains connection to make sure there is mains voltage.
C
cheyennestewartAug 21, 2025
What to do if water runs out of my Beem FRESH-AROMA-PURE?
- W
  wendyhughesAug 21, 2025
  If water runs out of your Beem Coffee Maker, it could be due to a few reasons. You might have too much water in the water tank, so avoid overfilling it. Also, if you remove the thermal jug during the brewing process, make sure it's only for a maximum of 30 seconds. Lastly, the coffee powder might be too finely ground, preventing water from passing through the permanent filter, so use a coarser grind.
S
Stephanie FernandezAug 25, 2025
Why does the fuse keep tripping with my Beem Coffee Maker?
- L
  Linda GarrettAug 25, 2025
  If the fuse in the fuse box is triggered when using your Beem Coffee Maker, it's likely that too many devices are connected to the same circuit. Reduce the number of devices on the circuit.
J
Jeremy GarciaAug 27, 2025
Why is the brewing process not starting on my Beem Coffee Maker?
- C
  Crystal LopezAug 27, 2025
  If the brewing process isn't starting on your Beem Coffee Maker, there could be several reasons. Ensure there is enough water in the water tank, filling it at least to the 4-cup marking. Check that the lid of the coffee bean compartment is properly engaged, listening for a click. Make sure the filter compartment is fully closed, also listening for a click. Finally, ensure the lid is properly placed on the filter holder.
N
nbrownAug 30, 2025
Why does the grinding/brewing process stop early on my Beem FRESH-AROMA-PURE?
- R
  Randy YorkAug 30, 2025
  If the grinding or brewing process stops prematurely on your Beem Coffee Maker, it's likely because the lid of the coffee bean compartment has been opened. Keep the lid closed during the grinding and brewing process.
H
hortonkurtSep 2, 2025
Why isn't the ground coffee dropping into the filter compartment of my Beem Coffee Maker?
- C
  cassandra98Sep 2, 2025
  If the ground coffee isn't dropping into the filter compartment of your Beem Coffee Maker, it could be because the sieve is blocked, so clean it. Another reason might be that the coffee bean compartment or the coffee beans are moist. Ensure both the compartment and beans are dry.
S
Susan GibsonSep 5, 2025
How to fix too weak coffee from my Beem Coffee Maker?
- T
  treyesSep 5, 2025
  If the coffee from your Beem Coffee Maker is too weak, it might be because there is too much water in the water tank. Only pour the quantity of water required for the number of cups you want into the water tank.
B
Brianna MillsSep 8, 2025
Why is my Beem FRESH-AROMA-PURE Coffee Maker producing so much steam?
- A
  Alisha BairdSep 8, 2025
  If your Beem Coffee Maker is producing a large amount of steam during the brewing process, it's likely that the device needs descaling.
J
John JonesSep 12, 2025
Why does my Beem FRESH-AROMA-PURE Coffee Maker have an unpleasant smell?
- R
  Richard RobinsonSep 12, 2025
  If you detect an unpleasant smell during the use of your Beem Coffee Maker, it could be because the device is being used for the first time. This smell should disappear after several uses. Alternatively, if the device has previously been descaled, rinse it out with fresh water.