Beem Latte Creme - User Manual

Questions and Answers

A
Amanda McphersonAug 10, 2025
What to do if my Beem Kitchen Appliance cannot be switched on?
- S
  Samantha HuangAug 10, 2025
  If your Beem Kitchen Appliance won't turn on, first ensure the plug is properly inserted into the mains socket. Check if the automatic circuit breaker in the fuse box has tripped and, if so, switch it back on. Make sure the milk container is correctly placed on the base plate. Finally, if the device was recently used, allow it to cool down, perhaps by rinsing it with cold water.
J
john31Aug 16, 2025
Why does the automatic circuit breaker in the fuse box trip when I use my Beem Kitchen Appliance?
- S
  Scott NguyenAug 16, 2025
  If the automatic circuit breaker trips when using your Beem Kitchen Appliance, it might be due to too many devices connected to the same power circuit. Try reducing the number of devices on that circuit. If the problem persists, contact customer service.
D
Deborah HillAug 22, 2025
How to improve frothing on my Beem Kitchen Appliance?
- C
  Cameron VillaAug 23, 2025
  If the frothing performance of your Beem Kitchen Appliance is not satisfactory, check that the frother is correctly placed on the holding pin. Also, make sure that the frother and holding pin are clean and not stuck. Clean the frother and holding pin if necessary.
A
alexandraaustinAug 27, 2025
What to do if milk froths over in my Beem Kitchen Appliance?
- J
  Jesus BlakeAug 27, 2025
  If milk froths over in your Beem Kitchen Appliance, it is likely that the milk container is too full. Ensure you pay attention to the maximum filling quantity to prevent this issue.
L
ljohnstonSep 3, 2025
What to do if my Beem Kitchen Appliance does not switch off automatically?
- N
  Nancy CoxSep 3, 2025
  If your Beem Kitchen Appliance does not switch off automatically, disconnect it from the mains and contact customer service.