49
Cleaning and maintenance
BEEM - Elements of Lifestyle
EN
The device must be cleaned after each use.
NOTE
Clean the device as soon as it has cooled down. Waiting too ►
long makes cleaning unnecessarily difcult.
Before cleaning, remove the frother (4) from the holding pin
(8) and clean each part separately.
NOTE
Clean regularly to prevent milk residue from sticking to the ►
frother (4) and holding pin (8).
Rinse the milk container with cold water after each frothing
process.
CAUTION
Damage to the device by penetrating liquids
Only rinse the inside of the milk container (1). ►
The device is ► not suitable for cleaning in a dishwasher.
Never immerse the device, the base plate or the mains ►
cable with mains plug in water or other liquids.
Wipe the device with damp cloth or sponge and a little wa-
shing-up liquid and then with a damp cloth without washing-
up liquid.
1
To Next Page
Loading...
