Why is my Beem Coffee Maker coffee too weak?
If the coffee from your Beem Coffee Maker is too weak, it may be that not enough coffee powder was used. Fill coffee powder for the desired number of cups.
What to do if water runs out of my Beem Coffee Maker?
If water runs out of your Beem Coffee Maker, it is likely because there is too much water in the water tank. Do not overfill the water tank.
Why is my Beem Coffee Maker dispensing coffee so slowly?
If your Beem Coffee Maker is dispensing coffee very slowly, it could be due to a blocked drip-stop, in which case you should clean the drip-stop. Another possible reason is that the appliance is scaled, so descale it.
What to do if my Beem Coffee Maker filter overflows?
If the filter of your Beem Coffee Maker overflows, ensure that the coffee jug is correctly positioned in the middle under the filter compartment. Also, check if the filter bag is properly inserted. If it's not, switch off the appliance and insert the filter bag correctly.
How to fix strong steam build-up in Beem Coffee Maker?
A strong build-up of steam during coffee brewing with your Beem Coffee Maker is likely caused by the appliance being excessively scaled. Descale the appliance to resolve this issue.
Why is my Beem Coffee Maker not turning on?
If the power indicator on your Beem Coffee Maker does not light up after switching it on, first, ensure that the appliance is plugged in. If it is, check the fuse or socket to make sure there is mains power.
What to do if my Beem Coffee Maker trips the circuit breaker?
If the automatic circuit breaker trips when using your Beem Coffee Maker, it might be because too many appliances are connected to the same power circuit. Reduce the number of appliances on the power circuit. If the issue persists, the appliance may be defective, and you should contact customer service.
Why does my Beem Star Elements keep tripping the circuit breaker?
The automatic circuit breaker might trip because too many appliances are connected to the same power circuit. Try reducing the number of appliances on the circuit. If that doesn't solve the problem, the appliance might be defective, and you should contact customer service.
What to do if my Beem Water Heater cannot be switched on?
If your Beem Water Heater won't switch on, first ensure it is properly plugged in. Next, check that there is mains power by testing the fuse and socket. Finally, make sure the appliance is correctly positioned in the cordless socket.
General| Brand | Beem |
|---|---|
| Model | Star Elements |
| Category | Water Heater |
| Language | English |
To Next Page