Insert the front wheels into the front legs until you hear a click sound.
The front wheel orientation(P8)
Push in the upper part of the direction lock to lock the front wheel (as A shows),
push up the button to achieve 360 degree rotation (as B shows).
Front wheel release(P9)
If you press the quick release button on both sides of the front wheels , it can automatically
remove the wheel.
Rear wheel assembly(P10)
Insert the rear axle into the hole, until you hear a click sound. Ensure that it is engaged
before use.
Rear wheel release(P11)
Press the rear wheel quick release button to unlock the rear wheels(as the pictures
shows).
To use the brake
1.Step down the brake pedal until you hear a click sound to engage brake
mechanism(P12.1).2.Step up the brake pedal to unlock the brakes(P12.2).
Canopy assembly
WARNING: Install the canopy before using this stroller.
1.Press the buttons on the canopy frame both sides, insert it into the matched faucet until
you hear a click to make sure that it is installed correctly(P13.1).2.Pull up the zipper
between the canopy and seat unit(P13.2).
Canopy disassembly
1.Disengage the zipper between the canopy and seat unit as the picture shows(P14.1).
2.Press the canopy buttons both sides, pull out the canopy frame as the picture shows to
disassembly the canopy(P14.2).
Canopy attachment and release(In order to wash)
Unzip (or fasten) the zip which is to connect the canopy and the seat unit(P15).Press the
jump ring located inside of canopy frame, pull out (insert) canopy frame, to release (install)
canopy(P16).Pull out (insert) the PP pipe which is fixed in the canopy frame, to release or
install canopy cover(P17).Canopy with frame(P18).
14
To Next Page
Loading...
