16
Collect and put stroller(P27)
To minimize the volume of the folded stroller, make the adjustable handle into smallest
section before folding.(show as A).
How to use the pump(P28)
Pull out the inflatable rod(B) according to the arrow direction, open the handle (C),
unscrew the tyre gas cap (D) and connect the gas nozzle(E). Open the gas switch on
pump(F) and start to inflate (G). After completion, close the inflator switch (H) and pull
down the inflator.
Care and maintenance
1.Fabric:sponge clean only with a mixture of water and mild detergent.Do not iron.
Do not bleach.
2.Periodically check for loose and broken parts.
3.Exposing the stroller to direct sunlight for long periods may cause fading.
4.If the stroller becomes wet, dry the metal parts and store it at cool and ventilate.
5.Check if the air pressure of the wheels is normal or not before using
(the standards air pressure is 20 Psi or 137.9 Kpa).
To Next Page
Loading...
