Beeper RE599HUDGPS - Adjusting Brightness; Adjusting Volume; Adjust Speed to Original Meter

Press 2 times the "MENU" button and the icon will flash. To start the adjustment, press the "SET" button, then click
 or to adjust the volume. Once the adjustment is complete, press again "SET", the HUD beeps.
The volume level is from 0 to 3, so that 0 = no = 3 and the maximum sound
5. UTILISATION
• Adjusting the brightness
Press once on the "MENU" button and the icon will flash. To start the adjustment, press the "SET" button, then press or to
adjust the brightness
Once the adjustment is complete, press again "SET", the HUD beeps.
The brightness is from 0 to 7, so that 0 = worst and bright the brightest = 7
• Adjust speed to your original meter
18
MENU
SET
MENU
SET
MENU
SET
Press 3 times on the "MENU" button, the icon lights up. To start the adjustment, press the "SET" button, then or to
adjust the speed, and then press "SET" to save the setting.
• Adjusting the volume