EasyManua.ls Logo

Beeper RE599HUDGPS - First Alert Level Setup; Second Alert Level Setup; Icon Test Procedure

Default Icon
24 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press 4 times the "MENU" button on the HUD and the icon will turn yellow. To start the adjustment, press the "SET"
button, then press or to adjust the speed you have chosen as the limit of speeding. It must be between 40 and 100
km / h must be less than the warning "Speeding".
When you reach the speed you have chosen, the icon will turn yellow and beep once
Press 5 times the "MENU" button on the HUD and the icon will turn red. To start the adjustment, press the "SET" button, then
press or to adjust the speed you have chosen as a speeding ticket. It can be between 40 and 195km / h and must be higher
than the warning "Caution".
When you reach the speed you have chosen, the icon will turn red and beep twice
5. UTILISATION
First alert level
•Second alert level
Icone test
19
MENU
SET
MENU
SET
MENU
SET
To verify that your monitor is working properly, press the "SET" button for 3 seconds, all the icons will
light up one after the other. The test mode automatically stops after 20 seconds. To manually exit,
Press "MENU" or "SET".