9
ENGLISH
3.2. Joining a Network
In this scenario a network exists and the user wants to add a new adapter
to that network. Any device on the existing network can be used to accept
the new device.
Follow the same procedure as above, the first adapter used being the new
adapter to be added to the network.
3.3. Leaving a Network
A network exists and the user wants to remove one adapter from that
network. For example, the user wants to remove the adapter to have it join
another logical network.
1. Press the button on the adapter to be removed for at least 10 seconds.
The adapter resets and restarts with a random NMK.
2. Wait for the reset to complete.
The Power LED on the adapter to be removed momentarily extinguishes
during reset, blinks during restart, then illuminates steadily. No error
occurs.
The user can remove the adapter or add it to another logical network on the
same medium when it is completed.
The PowerPacket utility program detects 200 Mbps PLC-Ethernet bridge
devices in the power line network, measures data rate performance, ensures
security of the power line network, and performs diagnostics.
To install the software on your computer:
- Insert the CDROM in your computer CD drive.
- In the introduction screen, click on the button to launch the software
installation.
- Follow the installation steps to install the software
A user guide is provided separately to assist you when using the PowerPacket
Utility software.
4. INSTALLING THE POWERPACKET UTILITY
To Next Page
Loading...