3.04 - Pre-Operational Check
IMPORTANT: Check each of the following, carefully, prior to engaging the equipment:
1. The spindle bearings have been greased.
2. The belts for proper tension.
3. No wrappings or foreign objects are around the blades or belts.
4. The blades are properly installed and the blade bolts properly torqued
4
.
5. All hardware is tight.
6. All safety shields and guards are in place and tightly attached.
7. No people or animals are in the work area.
WARNING: Shut off mower engine and remove spark plug wire from spark plug
before making adjustments, servicing or cleaning the machine. Failure to do so
could result in accidental starting of engine causing possible injury or death.
3.05 - Attaching to the Towing Vehicle
The C30-CE5 is designed to be towed behind a lawn tractor or an ATV.
To attach the mower to the tractor do the following:
1. Back the towing vehicle up to the mower.
2. Turn off engine and set parking break of towing vehicle.
3. Attach a category 1 hitch pin to towing vehicle drawbar.
OPERATION 12 BEFCO
C
YCLONE OPERATOR’S MANUAL
4
See Table 1, page 25.
Fig. 3
The cutting height is
adjusted by moving the
height adjustment spacers
on the wheel yokes above or
below the wheel arm.
To Next Page
Loading...
