Bego LaserStar T Plus - Saving Laser Parameters

34
86076 DB-en/03 355.00032
English
⋅
LaserStar T Plus
en
Saving laser parameters (memory manager)
Fig. 30 Alphanumericinput window
2. Enter the desired parameter value via the
touchscreen keyboard (details
→ ALPHANU-
MERIC INPUT WINDOW) and confirm the
input with [ ↵ ].
The input window is closed and the entered value
is indicated in the main menu.
NOTE
If you have entered a value exceeding the
permitted limits and confirmed it with [ ↵ ] the
max. permitted value is taken and indicated in the
main menu with red numerals.
The currently set laser parameters (including the
selected pulse shape, inert gas and MicroWeld™
settings) can be saved for later uses.
1. Touch the storage space name to open the
memory manager:
Fig. 31 Example for laser parameter
[Up] / [Down]
2. Scroll with these buttons until the desired sto-
rage space is indicated in the list.
[Save]
3. Touch the [ Save ] button.
 The prompt Chose a memory position to
save is indicated below the list and the text of
the [ Save ] button changes to [ Save to … ].
4. Touch the line in the list where the parameter
is to saved.
 The → ALPHANUMERIC INPUT WIN-
DOW is opened with the prompt Please enter
program name.
[ Save in ]
5. Enter a name for the storage space (max.
length 16 characters) and confirm with [ ↵ ].
 The laser parameters set in the main menu
are stored under selected memory space. The
previously saved laser parameters are over-
written without any warning.
 The memory manager is closed; return to
the main menu.