35
86076 DB-en/03 355.00032
English
⋅
LaserStar T Plus
Loading laser parameters (memory manager)
You can load a parameter set for welding (including
the selected pulse shape, inert gas and Micro-
Weld
TM
settings) from the saved laser parameters.
1. Touch the storage space name to open the
memory manager:
[Up] / [Down]
2. Scroll with these buttons until the desired sto-
rage space is indicated in the list.
3. Touch the line in the list where the parameters
to be loaded into the main menu are stored.
The memory manager is closed; return to
the main menu.
Alternatively to the direct selection described above
you can load the previous or next parameter set
(related to the currently loaded parameter set) using
the [ M– ] or [ M+ ] buttons in the main menu.
AUTO SAVE
The current parameter setting in the main menu are
automatically saved in this memory space as soon
as a parameter set is loaded from the memory (with
the buttons [ M– ] or [ M+ ] in the main menu or via
the memory manager) or if the device is turned off.
To Next Page
Loading...