4.1 LC-Display
1.) Display range (selected measurement range)
2.) Bargraph display
3.) UN Under-running the measurement range (current measurement value)
4.) UN Under-running the measurement range (MIN/ MAX function)
The symbol is displayed if the measurement range has been under-run at
least once during measurement.
5.) A/C: evaluation filter
6.) OV: exceeding the measurement range (MIN/ MAX function)
The symbol is displayed if the measurement range has been exceeded at least
once during measurement.
7.) OV: exceeding the measurement range (current measurement value)
8.) Battery capacity display
9.) FAST: time evaluation FAST
10.) SLOW: time evaluation SLOW
11.) Display of running time (max. 100h)
12.) FULL: display for full measurement data memory
13.) M Display for active saving
During measurement data saving, the symbol M is briefly displayed.
14.) R Display of saved measurement values
15.) Display of memory capacity
16.) dB: unit
17.) max: measurement data display of maximum value
18.) min: measurement data display of minimum value
19.) Measurement data display of current sound level
To Next Page
Loading...
